Knowledge Base

xia-1c VESA adapter

The VESA adapter is compatible with the following Xiaomi (mi.com) products:



The VESA adapter allows you to conveniently mount your XIAOMI brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts for this.

If you want to mount your VESA adapter directly to the wall, use suitable screws and dowels (not included).


Important Safeguards

Please read these instructions carefully  

Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should always be included. Failure to follow these instructions may result in injury or damage to persons or the product, for which we cannot accept any liability.



• This product should always be used in accordance with the specified safety instructions.
• Do not install your VESA adapter in combination with the monitor in places where there are people below.
• Do not exceed the maximum weight of the compatible monitor models as this may result in serious injury or damage to property.
• Observe the maximum ambient temperature of 35°C when using the product.
• Do not mount the VESA adapter near a heat source or in direct sunlight, as this could heat up the adapter.
• Check whether your mounting point (e.g. monitor arm) can withstand the weight of the monitor with VESA adapter.
The product is designed exclusively for mounting with a hole pattern of 75x75 mm.
• After installing the VESA adapter, the position of the monitor must be readjusted to ensure correct ergonomics.

Ensure that the device is switched off and disconnected from the power supply before installation to avoid possible injury or damage.

1. Before First Use

Check the product carefully for possible transport damage and for the absence of accessories, such as screws, which should be included in the scope of delivery.

Make sure that packaging materials and small screws and parts contained therein are inaccessible to children to minimize the risk of choking and other risks.

2. Maintenance and Cleaning

2.1 Maintenance

- It is recommended to check every three months that all screws are still tight. Also, regularly check the condition of all components of the product.
- Store the product in a cool and safe place, ideally at a maximum storage temperature of 40°C. For additional safety, keep the product away from children and preferably in its original packaging.
- Avoid any vibrations and shocks so as not to affect the life and functionality of the product.

2.2 Cleaning

- No corrosive or hot cleaning agents should be used to clean the product. Likewise, wire brushes, metal or other sharp materials are unsuitable for cleaning and should not be used.
- For gentle and effective cleaning, the use of a soft, damp cloth is recommended.

3. Waste Disposal

For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area.

4. Manufacturer Information

3idee Technologies S.à r.l.
5 Um Lenster Bierg
L-6125 Junglinster

5. Help and Feedback

If you need help with your article, we are here for you. We also appreciate any feedback.



Scope of Delivery Accessories

M4x14 Screw with cross recess (SP5 or SP1)

4x M4x14 Screw with cross recess (SP5 or SP1)

M4 Nut with flange (SP5 or SP1)

4x M4 Nut with flange (SP5 or SP1)

M3x8 Screw with cross recess (SP5)

2x M3x8 Screw with cross recess (SP5)


Horizontal / Vertical Alignment

Please note: Not all VESA adapters and monitors are designed for vertical (upright) orientation. This limitation is often due to the specific geometry of the adapter or monitor. Do not ignore this information, as the load limit of the adapter can quickly be exceeded if not installed properly.

We are continuously working on developing monitors and adapters that are also suitable for vertical orientation.

However, monitors are designed for horizontal alignment by default.

Horizontal Mounting: YES 

xia-1c VESA adapter

Vertical Mounting:  YES 

xia-1c VESA adapter

Assembly Instruction

Step 1

Remove the base of your monitor if it is already attached.

Step 2

⚠ Important: If the instructions in this step are not suitable for your device, please follow the mounting guidelines of the manufacturer of your monitor arm or swivel arm to mount the monitor to the wall or swivel arm.


Mount the adapter on the VESA connection of your monitor arm or directly on the wall. (Figure 1)

xia-1c VESA adapter Figure 1

Step 3

Once you have completed the last step, please check if all screws are tightened. (Figure 2)

xia-1c VESA adapter Figure 2

Step 4

Now insert the metal part of the monitor into the VESA adapter with one hand and hold the VESA arm with the other hand. (Figure 3) Please make sure that you secure the monitor well with your hand while it is not fully screwed.

xia-1c VESA adapter Figure 3

Step 5

Now continue to hold the monitor in the VESA adapter with one hand and secure the monitor with the supplied screws (SP5) with the other hand. The markings on the side (red) serve as a guide for the position of the holes under the VESA adapter. (Figure 4)

xia-1c VESA adapter Figure 4
Table of contents
Download as PDF

Here you can download the manual as a PDF

Buy now

Buy the xia-1c VESA adapter now at vesa-adapter.com