3idee

Knowledge Base

smsng-og9 VESA adapter

The VESA adapter is compatible with monitors from the Samsung (samsung.com) OLED G9 series and other models:

S49CG954SU

With the VESA adapter, you can easily attach your SAMSUNG monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the supplied screws and nuts for this.

If you want to attach your VESA adapter directly to the wall, use suitable screws and wall plugs. (not included in the scope of delivery).

 

FAQ - Frequently asked questions

 

Important Safeguards

Please read these instructions carefully  

Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should always be included. Failure to follow these instructions may result in injury or damage to persons or the product, for which we cannot accept any liability.

               

IMPORTANT - KEEP FOR FUTURE REFERENCE.

• This product should always be used in accordance with the specified safety instructions.
• Do not install your VESA adapter in combination with the monitor in places where there are people below.
• Do not exceed the maximum weight of the compatible monitor models as this may result in serious injury or damage to property.
• Observe the maximum ambient temperature of 35°C when using the product.
• Do not mount the VESA adapter near a heat source or in direct sunlight, as this could heat up the adapter.
• Check whether your mounting point (e.g. monitor arm) can withstand the weight of the monitor with VESA adapter.
The product is designed exclusively for mounting with a hole pattern of 75x75 mm.
• After installing the VESA adapter, the position of the monitor must be readjusted to ensure correct ergonomics.

⚠ CAUTION
Ensure that the device is switched off and disconnected from the power supply before installation to avoid possible injury or damage.

1. Before First Use

Check the product carefully for possible transport damage and for the absence of accessories, such as screws, which should be included in the scope of delivery.

⚠ CAUTION
Make sure that packaging materials and small screws and parts contained therein are inaccessible to children to minimize the risk of choking and other risks.

2. Maintenance and Cleaning

2.1 Maintenance

- It is recommended to check every three months that all screws are still tight. Also, regularly check the condition of all components of the product.
- Store the product in a cool and safe place, ideally at a maximum storage temperature of 40°C. For additional safety, keep the product away from children and preferably in its original packaging.
- Avoid any vibrations and shocks so as not to affect the life and functionality of the product.

2.2 Cleaning

- No corrosive or hot cleaning agents should be used to clean the product. Likewise, wire brushes, metal or other sharp materials are unsuitable for cleaning and should not be used.
- For gentle and effective cleaning, the use of a soft, damp cloth is recommended.

3. Waste Disposal

For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area.

4. Manufacturer Information

3idee Technologies S.à r.l.
5 Um Lenster Bierg
L-6125 Junglinster
Luxembourg

5. Help and Feedback

If you need help with your article, we are here for you. We also appreciate any feedback.

https://help.3idee.eu/en/contact

 

Scope of Delivery Accessories

M4x14 Screw with cross recess (SP2)

4x M4x14 Screw with cross recess (SP2)

M4x16 Screw with cross recess (SP22)

2x M4x16 Screw with cross recess (SP22)

M4x30 Screw with cross recess (SP22)

2x M4x30 Screw with cross recess (SP22)

K-Washer for M4 (SP22)

4x K-Washer for M4 (SP22)

 

Horizontal / Vertical Alignment

Please note: Not all VESA adapters and monitors are designed for vertical (upright) orientation. This limitation is often due to the specific geometry of the adapter or monitor. Do not ignore this information, as the load limit of the adapter can quickly be exceeded if not installed properly.

We are continuously working on developing monitors and adapters that are also suitable for vertical orientation.

However, monitors are designed for horizontal alignment by default.

Horizontal Mounting:  YES 

smsng-og9 VESA adapter

Vertical Mounting:  YES 

smsng-og9 VESA adapter
 

Assembly Instruction

Step 1

Remove the base of your Samsung Curved Monitor if it is already attached.


Step 2

A: Make sure that the supplied washers from (SP22) are correctly attached to the screw before installation. (Figure 1)

smsng-og9 VESA adapter Figure 1

Step 3

Align the VESA adapter with the "Up" mark to the top edge of the screen and place the adapter in the mount of your Samsung monitor.

Now screw the 3idee VESA adapter to your Samsung monitor as shown using the 4 supplied M4 screws (screw bag: SP22) and the washers (screw bag: SP22)

Make sure that the two long screws are screwed into the bottom holes and the two short screws are screwed into the top two holes.

(Figure 2)

smsng-og9 VESA adapter Figure 2

Step 4

Please check that all 4 screws are properly tightened. (Figure 3)

smsng-og9 VESA adapter Figure 3

Step 5

We recommend that you have a second person for this step.

Now lift the monitor and hold it against your monitor mount. Fasten the VESA adapter with the 4 M4x14 screws supplied (screw bag: SP2).

It is best to fasten 2 screws diagonally first so that the monitor can no longer fall down and you can fasten the remaining screws easily.

ATTENTION: Make sure you use the right screws!

(Figure 4)

smsng-og9 VESA adapter Figure 4

Step 6

Please make sure that all 4 screws are tight. (Figure 5)

smsng-og9 VESA adapter Figure 5
Table of contents
Download as PDF

Here you can download the manual as a PDF

Buy now

Buy the smsng-og9 VESA adapter now at vesa-adapter.com