3idee

Knowledge Base

smsng-cv27 VESA adapter (V2)

The VESA adapter is compatible with the following Samsung products (samsung.com):

C24T550FDR

C27T550FDR

C27T550FDU

C32T550FD

C32T550FDR

LC24T550FDR

LC24T550FDU

LC27T550FDR

LC327550FDRXEN

LS27C390EAUXEN

S27C390EAU

S27C392EAN

S32C390EAU

S39C Essentials

U32J590UQP


The VESA adapter allows you to conveniently mount your SAMSUNG brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws and dowels. (not included in the scope of delivery).

 

Important Safeguards

Please read these instructions carefully  

Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should always be included. Failure to follow these instructions may result in injury or damage to persons or the product, for which we cannot accept any liability.

               

IMPORTANT - KEEP FOR FUTURE REFERENCE.

• This product should always be used in accordance with the specified safety instructions.
• Do not install your VESA adapter in combination with the monitor in places where there are people below.
• Do not exceed the maximum weight of the compatible monitor models as this may result in serious injury or damage to property.
• Observe the maximum ambient temperature of 35°C when using the product.
• Do not mount the VESA adapter near a heat source or in direct sunlight, as this could heat up the adapter.
• Check whether your mounting point (e.g. monitor arm) can withstand the weight of the monitor with VESA adapter.
The product is designed exclusively for mounting with a hole pattern of 75x75 mm.
• After installing the VESA adapter, the position of the monitor must be readjusted to ensure correct ergonomics.

⚠ CAUTION
Ensure that the device is switched off and disconnected from the power supply before installation to avoid possible injury or damage.

1. Before First Use

Check the product carefully for possible transport damage and for the absence of accessories, such as screws, which should be included in the scope of delivery.

⚠ CAUTION
Make sure that packaging materials and small screws and parts contained therein are inaccessible to children to minimize the risk of choking and other risks.

2. Maintenance and Cleaning

2.1 Maintenance

- It is recommended to check every three months that all screws are still tight. Also, regularly check the condition of all components of the product.
- Store the product in a cool and safe place, ideally at a maximum storage temperature of 40°C. For additional safety, keep the product away from children and preferably in its original packaging.
- Avoid any vibrations and shocks so as not to affect the life and functionality of the product.

2.2 Cleaning

- No corrosive or hot cleaning agents should be used to clean the product. Likewise, wire brushes, metal or other sharp materials are unsuitable for cleaning and should not be used.
- For gentle and effective cleaning, the use of a soft, damp cloth is recommended.

3. Waste Disposal

For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area.

4. Manufacturer Information

3idee Technologies S.à r.l.
5 Um Lenster Bierg
L-6125 Junglinster
Luxembourg

5. Help and Feedback

If you need help with your article, we are here for you. We also appreciate any feedback.

https://help.3idee.eu/en/contact

 

Scope of Delivery Accessories

M4x14 screw with cross recess (SP2)

4x M4x14 screw with cross recess (SP2)

 

Horizontal / Vertical Alignment

Please note: Not all VESA adapters and monitors are designed for vertical (upright) orientation. This limitation is often due to the specific geometry of the adapter or monitor. Do not ignore this information, as the load limit of the adapter can quickly be exceeded if not installed properly.

We are continuously working on developing monitors and adapters that are also suitable for vertical orientation.

However, monitors are designed for horizontal alignment by default.

Horizontal Mounting: YES 

smsng-cv27 VESA adapter (V2)

Vertical Mounting:  YES 

⚠ ATTENTION
Vertical mounting is only possible up to (including) 27 inch monitors.

smsng-cv27 VESA adapter (V2)
 

Assembly Instruction

Step 1

Remove the base of your Samsung Curved monitor.

We also recommend that you remove the round cover on the back of the monitor before you start mounting the VESA adapter and reattach it before you mount the 3idee VESA adapter.


Step 2

Now attach the 3idee VESA adapter to your Samsung monitor as shown. (Figure 1)

Press the VESA adapter withforce into the mount of the monitor.
The red arrows indicate the direction in which the force must be applied.

smsng-cv27 VESA adapter (V2) Figure 1

Step 3

Once you slide the VESA adapter into the back of the monitor, you may notice that the side adapter guides stick out a bit from the monitor guides. (Figure 2)

That is correct. The VESA adapter is correctly inserted into your Samsung monitor as shown.

smsng-cv27 VESA adapter (V2) Figure 2

Step 4

For this step we recommend a 2nd person.

Now lift the monitor and hold it to your monitor mount. Fasten the VESA adapter with the 4 included M4x14 screws (screw bag: SP2).

It is best to fasten 2 screws diagonally first, so that the monitor cannot fall down and you can fasten the remaining screws without any effort.

ATTENTION: Pay attention to the right screws!

(Figure 3)

smsng-cv27 VESA adapter (V2) Figure 3

Step 5

Now please check if the monitor is correctly screwed to the monitor arm. This should look something like the picture. (Figure 4)

There is a little space at the marked position. This is correct.

smsng-cv27 VESA adapter (V2) Figure 4
Table of contents
Download as PDF

Here you can download the manual as a PDF