3idee

Knowledge Base

smsng-cj79 VESA adapter (V2)

The VESA adapter is compatible with the following Samsung products (samsung.com):

C34F791WQN

C34F791WQNXZA

C34F791WQU

C34J791WTN

C34J791WTP

CF79 Serie

CJ79 Serie

CJ791

LC34F791WQUXEN

LC34J791WTEXXY

LC34J791WTMXUE

LC34J791WTNXZA

LC34J791WTRXEN

LC34J791WTRXUF

LC34J791WTRXXU

LC34J791WTUXEN

LC34J791WTWXXL

LC34J791WTXNZA


The VESA adapter allows you to conveniently mount your SAMSUNG brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws and dowels (not included).

 

Important Safeguards

Please read these instructions carefully  

Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should always be included. Failure to follow these instructions may result in injury or damage to persons or the product, for which we cannot accept any liability.

               

IMPORTANT - KEEP FOR FUTURE REFERENCE.

• This product should always be used in accordance with the specified safety instructions.
• Do not install your VESA adapter in combination with the monitor in places where there are people below.
• Do not exceed the maximum weight of the compatible monitor models as this may result in serious injury or damage to property.
• Observe the maximum ambient temperature of 35°C when using the product.
• Do not mount the VESA adapter near a heat source or in direct sunlight, as this could heat up the adapter.
• Check whether your mounting point (e.g. monitor arm) can withstand the weight of the monitor with VESA adapter.
The product is designed exclusively for mounting with a hole pattern of 75x75 mm.
• After installing the VESA adapter, the position of the monitor must be readjusted to ensure correct ergonomics.

⚠ CAUTION
Ensure that the device is switched off and disconnected from the power supply before installation to avoid possible injury or damage.

1. Before First Use

Check the product carefully for possible transport damage and for the absence of accessories, such as screws, which should be included in the scope of delivery.

⚠ CAUTION
Make sure that packaging materials and small screws and parts contained therein are inaccessible to children to minimize the risk of choking and other risks.

2. Maintenance and Cleaning

2.1 Maintenance

- It is recommended to check every three months that all screws are still tight. Also, regularly check the condition of all components of the product.
- Store the product in a cool and safe place, ideally at a maximum storage temperature of 40°C. For additional safety, keep the product away from children and preferably in its original packaging.
- Avoid any vibrations and shocks so as not to affect the life and functionality of the product.

2.2 Cleaning

- No corrosive or hot cleaning agents should be used to clean the product. Likewise, wire brushes, metal or other sharp materials are unsuitable for cleaning and should not be used.
- For gentle and effective cleaning, the use of a soft, damp cloth is recommended.

3. Waste Disposal

For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area.

4. Manufacturer Information

3idee Technologies S.à r.l.
5 Um Lenster Bierg
L-6125 Junglinster
Luxembourg

5. Help and Feedback

If you need help with your article, we are here for you. We also appreciate any feedback.

https://help.3idee.eu/en/contact

 

Scope of Delivery Accessories

M4x14 Screw with cross recess (SP2)

4x M4x14 Screw with cross recess (SP2)

 

Horizontal / Vertical Alignment

Please note: Not all VESA adapters and monitors are designed for vertical (upright) orientation. This limitation is often due to the specific geometry of the adapter or monitor. Do not ignore this information, as the load limit of the adapter can quickly be exceeded if not installed properly.

We are continuously working on developing monitors and adapters that are also suitable for vertical orientation.

However, monitors are designed for horizontal alignment by default.

Horizontal Mounting: YES 

smsng-cj79 VESA adapter (V2)

Vertical Mounting: NO 

smsng-cj79 VESA adapter (V2)
 

Assembly Instruction as Video

 

Assembly Instruction

Step 1

Place your SAMSUNG monitor securely on a soft surface.

To remove the stand of your Samsung monitor, first remove the cover by pulling it away as shown. (Figure 1)

smsng-cj79 VESA adapter (V2) Figure 1

Step 2

Now loosen the 2 screws that secure the stand.
We need these 2 screws to be able to mount the VESA adapter later. (Figure 2)

smsng-cj79 VESA adapter (V2) Figure 2

Step 3

Position your 3idee VESA adapter with the arrow and text "UP" so that it is visible to you and with the arrow pointing towards the top edge of the monitor.


(Figure 3)

smsng-cj79 VESA adapter (V2) Figure 3

Step 4

Insert the VESA adapter into the monitor mount as far as it will go.

(Figure 4)

smsng-cj79 VESA adapter (V2) Figure 4

Step 5

Take the two M4x14 pan head screws supplied from the unlabeled screw bag and fasten the adapter once on the right and once on the left. Tighten the screw firmly so that the adapter cannot wobble.

(Figure 5)

smsng-cj79 VESA adapter (V2) Figure 5

Step 6

For this step we recommend a 2nd person.

Now lift the monitor and hold it to your monitor mount. Fasten the VESA adapter with the 4 included M4x14 screws (screw bag: SP2).

It is best to fasten 2 screws diagonally first, so that the monitor cannot fall down and you can fasten the remaining screws without any effort.

ATTENTION: Pay attention to the right screws!

(Figure 6)

smsng-cj79 VESA adapter (V2) Figure 6

Step 7

Tighten the screws firmly. Done! (Figure 7)

smsng-cj79 VESA adapter (V2) Figure 7