smsng-cv27 VESA adapter (V2)

The VESA adapter is compatible with the following products from Samsung (

C32T550FD - LC32T550FDRXEN

With the VESA adapter you can easily mount your SAMSUNG brand monitor to a monitor arm with VESA hole pattern (75 x 75mm). Use the included screws and nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws and dowels. (not included in the scope of delivery).

Here you can download the manual as a PDF

Download as PDF

Step 1

Remove the base of your Samsung Curved monitor.

We also recommend that you remove the round cover on the back of the monitor before you start mounting the VESA adapter and reattach it before you mount the 3idee VESA adapter.

Step 2

Now attach the 3idee VESA adapter to your Samsung monitor as shown. (Figure 1)

Press the VESA adapter withforce into the mount of the monitor.
The red arrows indicate the direction in which the force must be applied.

Figure 1

Step 3

Once you slide the VESA adapter into the back of the monitor, you may notice that the side adapter guides stick out a bit from the monitor guides. (Figure 2)

That is correct. The VESA adapter is correctly inserted into your Samsung monitor as shown.

Figure 2

Step 4

Now attach your Samsung monitor to your monitor arm with the 3idee VESA adapter. (Figure 3)

Figure 3

Step 5

Now please check if the monitor is correctly screwed to the monitor arm. This should look something like the picture. (Figure 4)

There is a little space at the marked position. This is correct.

Figure 4
General notes
  • Make sure that all screws are tight and that the monitor audibly clicks into place during installation (if available).
  • The material of the adapter is not heat resistant. Avoid direct heat around the adapter such as PC exhaust or direct sunlight in summer.
  • PLA is UV resistant but not suitable for high temperatures.
  • Avoid jerky movements (pulling, tearing) on the PC monitor. This can affect the performance of the VESA adapter.
  • Do not subject the PC monitor to excessive loads such as leaning or pushing. This can impair the performance of the VESA adapter.
Material Notes

The adapter is made of high-quality and extremely impact-resistant special polylactide (PLA) plastic. This PLA differs from standard PLA by its high mechanical properties. It is both a colorfast and UV-resistant material and has low flammability. Polylactide has a low temperature resistance of about 45°C-55°C and is therefore not suitable for use around direct heat and heat sources.

We wish you a lot of fun with your product.

Your 3idee Team

Schreibe eine E-Mail an:

Wir antworten in der Regel innerhalb weniger Stunden. Die Kundenzufriedenheit ist ein sehr wichtiger Prozess in unserem Unternehmen.

Schau dir an, wie wir arbeiten:

Send an email to:

We usually reply within a few hours. Customer satisfaction is a very important process in our company.

Look at how we work: