hp2i-o VESA adapter

The VESA adapter is compatible with the following products from hp (hp.com): OMEN 27i Gaming Monitor.

The VESA adapter allows you to conveniently mount your HP brand monitor to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts.

If you want to mount your VESA adapter directly to the wall, use suitable screws and dowels (not included).

Here you can download the manual as a PDF

Download as PDF

Not all VESA adapters and monitors are suitable for vertical alignment.
This is due to the geometry of the adapter / monitor, which is sometimes not otherwise feasible.
We point out that this information should not be disregarded in any case, because the adapter comes very quickly to its durability limit if not specified mounting.

We always try to develop monitors for vertical (upright) mounting as well.

The standard orientation of a monitor is horizontal.

Horizontal mounting: YES

Vertical mounting: NO

Step 1

Place your screen in a safe, soft place so that your screen does not get damaged.

Remove the base of your monitor if it is already attached. Use a screwdriver and unscrew the two screws underneath the mount. (Figure 1)

Don't put the two screws too far away, we will need them again soon to fix the VESA adapter. Take care of the springs, otherwise you can lose them quickly.

Figure 1

Step 2

Now pull out the base of your monitor upwards. (Figure 2)

Figure 2

Step 3

Now insert the 3idee VESA adapter into your HP Omen monitor. (Figure 3)

Figure 3

Step 4

Now you can reuse the two screws you loosened earlier to attach the VESA adapter to your monitor. (Figure 4)

Figure 4

Step 5

Now hold the VESA adapter on your monitor arm and screw it tight from behind with the other hand. (Figure 5)

Figure 5

Step 6

Please make sure that all 4 screws are tight. (Figure 6)

Figure 6
General notes
  • Make sure that all screws are tight and that the monitor audibly clicks into place during installation (if available).
  • The material of the adapter is not heat resistant. Avoid direct heat around the adapter such as PC exhaust or direct sunlight in summer.
  • PLA is UV resistant but not suitable for high temperatures.
  • Avoid jerky movements (pulling, tearing) on the PC monitor. This can affect the performance of the VESA adapter.
  • Do not subject the PC monitor to excessive loads such as leaning or pushing. This can impair the performance of the VESA adapter.
Material Notes

The adapter is made of high-quality polylactide (PLA) plastic. PLA is both a colorfast and UV-resistant material and has low flammability. Polylactide has a low temperature resistance of approx. 45°C-55°C and is therefore not suitable for use in the vicinity of direct heat and heat sources.

We wish you a lot of fun with your product.

Your 3idee Team

Schreibe eine E-Mail an:


Wir antworten in der Regel innerhalb weniger Stunden. Die Kundenzufriedenheit ist ein sehr wichtiger Prozess in unserem Unternehmen.

Schau dir an, wie wir arbeiten:

Send an email to:


We usually reply within a few hours. Customer satisfaction is a very important process in our company.

Look at how we work: