csl-f7b VESA adapter

The VESA adapter is compatible with the following All-in-One-PC's from CSL (csl-computer.com):

Unity F27B-GLS
Unity F27W-GLS

With the VESA adapter, you can easily mount your CSL all-in-one PC to a monitor arm with VESA hole pattern (75 x 75mm). Use the included screws and nuts for this.

If you want to mount your VESA adapter directly to the wall, use suitable screws and dowels. (not included in the scope of delivery)


Here you can download the manual as a PDF

Download as PDF

Not all VESA adapters and monitors are suitable for vertical alignment. (upright)
This is due to the geometry of the adapter / monitor, which is sometimes not otherwise feasible.
We would like to point out that this information should not be disregarded under any circumstances, as the adapter very quickly reaches its durability limit if the mounting is not specified.

We always try to develop monitors for vertical (upright) mounting as well.

The standard orientation of a monitor is horizontal.

Horizontal mounting: YES

Vertical mounting: NO

Step 1

To remove the original foot on your All-in-One PC, the small plastic flap must be removed. (Figure 1)

Figure 1

Step 2

Now finally remove the foot by loosening the two screws with a screwdriver.



Step 3

Now plug the 3idee VESA adapter onto the mount of your CSL All-in-One PC. (Figure 2)

Figure 2

Step 4

Now tighten the adapter using the 2 shorter screws provided. (Figure 3)

Figure 3

Step 5

Please check if you have tightened both screws. (Figure 4)

Figure 4

Step 6

For this step we recommend the help of a 2nd person.

Now the monitor + VESA adapter can be screwed to your VESA arm. (Figure 5)

Please use the 4 screws included in the delivery.

Figure 5

Step 7

Please make sure that all 4 screws are properly tightened. (Figure 6)

Figure 6
General notes
  • Make sure that all screws are tight and that the monitor audibly clicks into place during installation (if available).
  • The material of the adapter is not heat resistant. Avoid direct heat around the adapter such as PC exhaust or direct sunlight in summer.
  • PLA is UV resistant but not suitable for high temperatures.
  • Avoid jerky movements (pulling, tearing) on the PC monitor. This can affect the performance of the VESA adapter.
  • Do not subject the PC monitor to excessive loads such as leaning or pushing. This can impair the performance of the VESA adapter.
Material Notes

The adapter is made of high-quality polylactide (PLA) plastic. PLA is both a colorfast and UV-resistant material and has low flammability. Polylactide has a low temperature resistance of approx. 45°C-55°C and is therefore not suitable for use in the vicinity of direct heat and heat sources.

We wish you a lot of fun with your product.


Your 3idee Team

Schreibe eine E-Mail an:

support@3idee.eu

Wir antworten in der Regel innerhalb weniger Stunden. Die Kundenzufriedenheit ist ein sehr wichtiger Prozess in unserem Unternehmen.

Schau dir an, wie wir arbeiten:

Send an email to:

support@3idee.eu

We usually reply within a few hours. Customer satisfaction is a very important process in our company.

Look at how we work: