3idee

Knowledge Base

csl-f7b VESA adapter

The VESA adapter is compatible with the following All-in-One-PC's from CSL (csl-computer.com) compatible:

F27B-GLS

F27B-JLS

F27B-JLS Pentium


The VESA adapter allows you to conveniently mount your CSL brand All-in-One PC to a monitor arm with a VESA hole pattern (75 x 75mm). Use the included screws and nuts for this.

If you want to mount your VESA adapter directly to the wall, use suitable screws and dowels. (not included in the scope of delivery)

 

Important Safeguards

Please read these instructions carefully  

Please read these instructions carefully and keep them for future reference. If you pass the product on to third parties, these instructions should always be included. Failure to follow these instructions may result in injury or damage to persons or the product, for which we cannot accept any liability.

               

IMPORTANT - KEEP FOR FUTURE REFERENCE.

• This product should always be used in accordance with the specified safety instructions.
• Do not install your VESA adapter in combination with the monitor in places where there are people below.
• Do not exceed the maximum weight of the compatible monitor models as this may result in serious injury or damage to property.
• Observe the maximum ambient temperature of 35°C when using the product.
• Do not mount the VESA adapter near a heat source or in direct sunlight, as this could heat up the adapter.
• Check whether your mounting point (e.g. monitor arm) can withstand the weight of the monitor with VESA adapter.
The product is designed exclusively for mounting with a hole pattern of 75x75 mm.
• After installing the VESA adapter, the position of the monitor must be readjusted to ensure correct ergonomics.

⚠ CAUTION
Ensure that the device is switched off and disconnected from the power supply before installation to avoid possible injury or damage.

1. Before First Use

Check the product carefully for possible transport damage and for the absence of accessories, such as screws, which should be included in the scope of delivery.

⚠ CAUTION
Make sure that packaging materials and small screws and parts contained therein are inaccessible to children to minimize the risk of choking and other risks.

2. Maintenance and Cleaning

2.1 Maintenance

- It is recommended to check every three months that all screws are still tight. Also, regularly check the condition of all components of the product.
- Store the product in a cool and safe place, ideally at a maximum storage temperature of 40°C. For additional safety, keep the product away from children and preferably in its original packaging.
- Avoid any vibrations and shocks so as not to affect the life and functionality of the product.

2.2 Cleaning

- No corrosive or hot cleaning agents should be used to clean the product. Likewise, wire brushes, metal or other sharp materials are unsuitable for cleaning and should not be used.
- For gentle and effective cleaning, the use of a soft, damp cloth is recommended.

3. Waste Disposal

For the disposal of this product we recommend to contact the responsible local authorities or disposal services. They can provide you with detailed information on available disposal options and recycling centers in your area.

4. Manufacturer Information

3idee Technologies S.à r.l.
5 Um Lenster Bierg
L-6125 Junglinster
Luxembourg

5. Help and Feedback

If you need help with your article, we are here for you. We also appreciate any feedback.

https://help.3idee.eu/en/contact

 

Scope of Delivery Accessories

M4x14 Phillips head screw (SP2)

4x M4x14 Phillips head screw (SP2)

M4x10 Phillips head screw (SP4)

2x M4x10 Phillips head screw (SP4)

 

Horizontal / Vertical Alignment

Please note: Not all VESA adapters and monitors are designed for vertical (upright) orientation. This limitation is often due to the specific geometry of the adapter or monitor. Do not ignore this information, as the load limit of the adapter can quickly be exceeded if not installed properly.

We are continuously working on developing monitors and adapters that are also suitable for vertical orientation.

However, monitors are designed for horizontal alignment by default.

Horizontal Mounting: YES 

csl-f7b VESA adapter

Vertical Mounting:  YES 

csl-f7b VESA adapter
 

Assembly Instruction

Step 1

To remove the original foot on your All-in-One PC, the small plastic flap must be removed. (Figure 1)

csl-f7b VESA adapter Figure 1

Step 2

Now finally remove the foot by loosening the two screws with a screwdriver.



Step 3

Now plug the 3idee VESA adapter onto the mount of your CSL All-in-One PC. (Figure 2)

csl-f7b VESA adapter Figure 2

Step 4

Now tighten the adapter using the 2 shorter screws provided. (Figure 3)

csl-f7b VESA adapter Figure 3

Step 5

Please check if you have tightened both screws. (Figure 4)

csl-f7b VESA adapter Figure 4

Step 6

For this step we recommend a 2nd person.

Now lift the monitor and hold it to your monitor mount. Fasten the VESA adapter with the 4 included M4x14 screws (screw bag: SP2).

It is best to fasten 2 screws diagonally first, so that the monitor cannot fall down and you can fasten the remaining screws without any effort.

ATTENTION: Pay attention to the right screws!

(Figure 5)

csl-f7b VESA adapter Figure 5

Step 7

Please make sure that all 4 screws are properly tightened. (Figure 6)

csl-f7b VESA adapter Figure 6
Table of contents
Download as PDF

Here you can download the manual as a PDF

Buy now

Buy the csl-f7b VESA adapter now at vesa-adapter.com